Peavey Automix 80304050 - Manual (Page 10)

10
SPECIFICATIONS
Nominal Out = +2 dBu (1 volt)
Due to our efforts for constant improvements,
features and specifications listed herein are subject to change without notice.
TM ®
PREAMP SPECS
EIN:
-122 dBu (terminated 150 ohms)
PREAMP GAIN RANGE:
25 dB to 55 dB
INPUT IMPEDANCE: (MIC and LINE)
2,000 ohms (transformer balanced)
PHANTOM POWER:
+12 volts at Mic
±
terminals
INPUT SENSITIVITY:
-65 dBu
PRIORITY (Channels 1 & 2):
0 dB to 9 dB
LOW CUT FILTER:
-3 dB at 75 Hz (6 dB per octave)
COMMON MODE (rejection ratio):
-85 dB
GENERAL SPECS
OUTPUT IMPEDANCE (transformer balanced):
600 ohms (nominal)
DISTORTION:
< 0.1 % at nominal
FREQUENCY RESPONSE:
20 Hz to 20 kHz, +1/-2 dB at nominal
MAXIMUM OUTPUT LEVEL:
+20 dBu (Hi-Z load)
+16 dBm (600 ohm load)
REMOTE VOLUME RANGE:
0 dB to 70 dB of attenuation
OFF CHANNEL ATTENUATION:
0 dB to -70 dB
MUTE:
Channel is attenuated 45 dB when mute to ground
connection is made.
MUTEBUS:
Multiple channels can be attenuated 45 dB when
mutebus to ground connection is made.
STATUS OUPUT:
Status is low (0 V) when channel is active. It is
high (3.8 V) when channel is not active.
POWER CONSUMPTION:
AC 120 volts, 60 Hz Domestic
AC 230 volts, 50/60 Hz Export
15 watts
WEIGHT:
10.8 lbs
DIMENSIONS:
3-1/2" H x 17" W x 10-1/8" D