Planet Technology FGSW-2624SF - Manual (Page 22)

- 22 -
Figure 4-13 Port-based VLAN Configuration Web Page screen
Press “AddNew” button to add a port-based VLAN group and setup procedure is shown as below:
1. Input a VLAN group ID and available range is 1-4094.
2. Select specific port as member port and the screen in Figure 4-14 appears.
3. After setup completed, please press “Apply” button to take effect and the screen in Figure 4-15 appears.
4. Please press “Back” for return to VLAN configuration screen to add other VLAN group, the screen in Figure 4-16
appears.