Panasonic SC-HT40 - Manual (Page 21)

21
RQTV0105
Specifications
Specifications (IHF'78)
g AMPLIFIER SECTION
RMS output power of each channel driven
10 % total harmonic distortion
1 kHz front CH 90 W per channel (4 Ω)
1 kHz surround CH 90 W per channel (4 Ω)
1 kHz center CH 220 W per channel (6 Ω)
100 Hz subwoofer CH 220 W per channel (6 Ω)
Total RMS output power 800 W
Rated minimum sine wave RMS power output
1% total harmonic distortion (Dolby Digital mode)
150 Hz to 20 kHz front CH 50 W per channel (4 Ω)
150 Hz to 20 kHz surround CH 50 W per channel (4 Ω)
150 Hz to 20 kHz center CH 150 W per channel (6 Ω )
45 Hz to 150 Hz subwoofer CH 150 W per channel (6 Ω)
Total FTC output power 400 W
Rated minimum sine wave RMS power output
1% total harmonic distortion (Stereo mode)
150 Hz to 20 kHz front CH 50 W per channel (4 Ω)
45 Hz to 150 Hz subwoofer CH 150 W per channel (6 Ω)
Total FTC output power 200 W
Total harmonic distortion
Half power at 1 kHz (Front CH) 0.2 % (4 Ω)
Input sensitivity
DVR/DVD-P, TV 450 mV, IHF'66
MUSIC PORT 250 mV, IHF'66
S/N (IHF A)
DVR/DVD-P, TV, MUSIC PORT 70 dB (85 dB, IHF'66)
Input impedance
DVR/DVD-P, TV, MUSIC PORT 47 kΩ
Tone controls
BASS 50 Hz, +10 to -10 dB
TREBLE 20 kHz, +10 to -10 dB
g FM TUNER SECTION
Frequency range 87.9 MHz to 107.9 MHz
Sensitivity 11.2 dBf (2 µV, IHF '58)
50 dB quieting sensitivity
MONO 18.3 dBf (4.5 µV, IHF '58)
STEREO 38.3 dBf (45 µV, IHF '58)
Total harmonic distortion
MONO 0.3%
STEREO 0.4%
S/N
MONO 71 dB
STEREO 65 dB
Frequency response 20 Hz to 15 kHz, +1 dB, -2 dB
Image rejection at 98 MHz 40 dB
Stereo separation
1 kHz 40 dB
Antenna terminal 75 Ω (unbalanced)
g AM TUNER SECTION
Frequency range 530 kHz to 1710 kHz
g SPEAKER SECTION
Front speaker (SB-PF40)
Type 1 Way, 1 Speaker, Bass-ref.
Speaker unit
Full range 6.5 cm (2 1 /
2
") cone type x 1, 4 Ω
Input power (IEC) 90 W (Max)
Output sound pressure level 78 dB/W (1.0 m)
Frequency range 110 Hz to 23 kHz (-16 dB)
120 Hz to 21 kHz (-10 dB)
Dimensions (W x H x D) 92 mm x 270 mm x 95.4 mm
(3 5 /
8
" x 10 5 /
8
" x 3 3 /
4
")
Mass 0.8 k g (1.8 lb.)
Surround speaker (SB-PS40)
Type 1 Way, 1 Speaker, Bass-ref.
Speaker unit
Full range 6.5 cm (2 1 /
2
") cone type x 1, 4 Ω
Input power (IEC) 90 W (Max)
Output sound pressure level 76 dB/W (1.0 m)
Frequency range 110 Hz to 22 kHz (-16 dB)
120 Hz to 21 kHz (-10 dB)
Dimensions (W x H x D) 92 mm x 135 mm x 95.4 mm
(3 5 /
8
" x 5 5 /
6
" x 3 3 /
4
")
Mass 0.6 k g (1.3 lb.)
Center speaker (SB-PC40)
Type 1 Way, 2 Speakers, Bass-ref.
Speaker unit
Full range 6.5 cm (2 1 /
2
") cone type x 2, 6 Ω
Input power (IEC) 220 W (Max)
Output sound pressure level 82 dB/W (1.0 m)
Frequency range 110 Hz to 22 kHz (-16 dB)
120 Hz to 20 kHz (-10 dB)
Dimensions (W x H x D) 270 mm x 92 mm x 95.4 mm
(10 5 /
8
" x 3 5 /
8
" x 3 3 /
4
")
Mass 1.3 k g (2.9 lb.)
Passive subwoofer (SB-W40)
Type 1 Way, 1 Speaker, Bass-ref .
Speaker unit (Woofer) 16 cm (6 1 /
2
") cone type, 6 Ω
Input power (IEC) 220 W (Max)
Output sound pressure level 78 dB/W (1.0 m)
Frequency range 31 Hz to 500 Hz (-16 dB)
38 Hz to 400 Hz (-10 dB)
Dimensions (W x H x D)
182 mm x 392 mm x 266 mm (7 3 /
16
" x 15 7 /
16
" x 10 1 /
2
")
Mass 3.7 k g (8.2 lb.)
g GENERAL
Power supply AC 120 V, 60 Hz
Power consumption 100 W
Dimensions (W x H x D)
430 mm x 105 mm x 385 mm (16 15 /
16
" x 4 1 /
8
" x 15 1 /
32
")
Mass 3.8 k g (8.4 lb.)
Power consumption in standby mode: 1 W
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Digital input OPTICAL 2
COAXIAL 1
SC-HT40PP.indb 21 1/20/2006 5:27:32 PM