Philips HSB4352/12 - Manual (Page 33)

34
Check the disc type, color system and •
regional code. Check for any scratches or
smudges on the disc.
Press
• OPTIONS to exit the system setup
menu.
Disable the password for parental control
•
or change the rating level.
Moisture has condensed inside the system.
•
Remove the disc and leave the system
turned on for about an hour. Disconnect
and reconnect the AC power plug, and
then turn on the system again.
As a power-saving feature, the system
•
turns off automatically 15 minutes after
disc play reaches the end and no control is
operated.
Poor radio reception
Increase the distance between the unit and •
your TV or VCR.
Fully extend the FM antenna.
•
Connect an outdoor FM antenna instead. •
Unable to select Progressive Scan
Ensure the component video mode is set •
to [YUV].
No sound on HDMI connection.
You may not hear any sound if the •
connected device is non-HDCP compliant
or only DVI-compatible.
Audio or subtitle languages cannot be set
The disc is not recorded with sound or •
subtitles in multiple languages.
The audio or subtitle language setting is
•
prohibited on the disc.
EN