Remote control operation, Connecting optional bluetooth adapter, Other connections 11 – Pioneer HTZ180DVD User Manual

Page 43

Advertising
background image

Other connections

11

43

En

English

Français

Deutsch

Nederlands

Italiano

Español

Remote control operation

The remote control supplied with this system
allows you to play and stop media, and perform

other operations.

1

Connecting Optional

Bluetooth

ADAPTER

1 Switch the system into standby and

connect Bluetooth ADAPTER to the ADAPTER

PORT located in the rear panel.
For the connection diagram, see 5 on page 40.

2 Press STANDBY/ON.
3 Press ADAPTER PORT and to switch to BT
AUDIO input mode.

2

Pairing

Bluetooth

ADAPTER and

Bluetooth

wireless technology

device

“Pairing” must be done before you start
playback of Bluetooth wireless technology
content using Bluetooth ADAPTER. Make sure
to perform pairing first time you operate the
system or any time pairing data is cleared.
“Pairing” is the step necessary to register
Bluetooth wireless technology device to enable

Bluetooth communications.

3

For more details,

see also the operating instructions of your
Bluetooth wireless technology device.
1 Press SHIFT+SETUP to select BT SETUP,

then press ENTER.
2 Use

/ to select PAIRING, then press

ENTER.
3 Select the PIN code to be used from 0000/

1234/8888 using

/, then press ENTER.

PAIRING blinks.

CAUTION

• You can use any of 0000/1234/8888 PIN

codes. Bluetooth wireless technology
device using any other PIN code cannot be
used with this system.

4 Switch on the Bluetooth wireless

technology device that you want to make

pairing, place it near the system and set it

into the pairing mode.

Note

1 • It may be necessary that the Bluetooth wireless technology enabled device supports AVRCP profiles.

• Remote control operations cannot be guaranteed for all Bluetooth wireless technology enabled devices.

Music data

This unit

Bluetooth

®

ADAPTER

Remote control operation

Bluetooth
wireless
technology
enabled device:
cell phone

Bluetooth wireless
technology
enabled device:
Digital music
player

Device not
equipped with
Bluetooth wireless
technology:
Digital music
player
+
Bluetooth audio

transmitter
(sold commercially)

2 When the Bluetooth ADAPTER is not plugged in the

ADAPTER PORT, BT AUDIO input mode cannot be entered even if

ADAPTER PORT is pressed.
3 • Pairing is required when you first use Bluetooth wireless technology device and Bluetooth ADAPTER.

• To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology

device.

HTZ180_181_280_282DVD_En.book 43 ページ 2009年3月13日 金曜日 午後2時50分

Advertising
This manual is related to the following products: