Select a play source – Philips HTS3568 User Manual
Page 21
English
EN 21
Get
st
ar
ted
7
Select [ OK ] in the menu, then press OK
to start scanning of devices.
Once complete, audio input mapping
menu is displayed.
Aux2
Coaxial In
Aux1
Audio Input Mapping
TV
Recorder
Other (non-HDMI)
8
Select an input to map (e.g. AUX1,
AUX2), then press B.
9
Select the correct device that connected
to this audio input, then press OK.
Repeat steps 8~9 to map other
connected devices.
10
To exit the menu, press OPTIONS.
•
Select a play source
On the main unit
1
Press SOURCE button repeatedly to
select: DISC > FM > AUX1 > AUX2 > DI
(DIGITAL IN) > MP3 LINK >
On the remote control
DISC ...
Press DISC to switch to DISC mode.
Press USB to switch to USB mode.
Press RADIO to switch to FM band.
Press AUX / MP3 LINK repeatedly to
listen to the audio output from the external
device.
Display
Device connected to
AUX1
AUDIO IN-AUX1 sockets.
AUX2
AUDIO IN-AUX2 sockets.
DI
DIGITAL IN-COAXIAL
socket.
MP3 LINK
MP3 LINK socket.
•
•
•
•