Panasonic CF-VDR301U - Manual (Page 9)

9
E
NOTE
To remove a disc when the computer is powered off, insert a pointed object (e.g.,
the bent-out tip of a paper clip) into the emergency hole (D). Pushing it to the end
allows the tray to come out.
If the vibration of the drive is excessive, check the disc. If the disc is normal and
is inserted correctly, set [DVD Drive Speed] to [Low] in the [Main] menu of the
Setup Utility (
Reference Manual “Setup Utility”).
For AutoPlay CD:
• If an AutoPlay CD does not start after the computer resumes from standby or hiber-
nation, remove the disc from the drive and then reinsert it after waiting 15 seconds.
• An AutoPlay CD may start during fi le access depending on the status of the disc.
When playing back video from a disc, playback may not be smooth in some conditions.
If the drive is not accessed for 30 seconds, the drive motor will automatically be shut
down to reduce the power consumption. When the drive is accessed again, the drive motor
is turned on. In this case, reading of the disc data will take approximately 30 seconds.
Power-saving Mode