Philips HSB2351/98 - Manual (Page 14)

15
Turn on
1
Press .
The unit switches to the last selected
»
source.
Find the correct viewing
channel
1
Press DISC to switch to disc mode.
2
Press the source button repeatedly on the
remote control of your TV.
Tip
The video-in channel may be called AV, VIDEO, HDMI •
etc. See the TV user manual on how to select the
correct input on the TV.
Select the correct TV system
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
1
Press OPTIONS.
2
Select [Video Setup].
3
Select [TV Type] and then press .
4
Select a setting and then press OK.
• [PAL] - For TV with PAL color system.
3
1
2
4 Get started
Caution
Use of controls or adjustments or performance of •
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat, •
sunshine or fi re. Never discard batteries in fi re.
Risk of decreased battery life! Never mix different
•
brands or types of batteries.
Risk of product damage! When the remote control is
•
not used for long periods, remove the batteries.
Note
Perchlorate Material - special handling may apply. See •
www.dtsc.ca.gov/hazardouswaste/perchlorate.
1
Open the battery compartment.
2
Insert two R03 or AAA batteries with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
English
EN