Panasonic CX-DVP292U - Manual (Page 12)

User Settings
(continued)
Video CD DVD Video
Video CD DVD Video
MP3 CD Video CD DVD Video
DVD Video
E
N
G
L
I
S
H
15
1. Menu Language : English
2. Subtitle Language : English
3. Audio Language : English
4. TV Aspect : 16:9
5. TV Mode (4:3) : Pan&Scan
6. On-Screen Messages : ON
7. Audio Output Level : 2
8. D. Range Compression : OFF
<Main Menu>
0 : Exit
CX-DVP292U CX-DVP292U
24 25
(Example: “1. 1”)
1. Menu Language : English
2. Subtitle Language : English
3. Audio Language : English
4. TV Aspect : 16:9
5. TV Mode (4:3) : Pan&Scan
6. On-Screen Messages : ON
7. Audio Output Level : 2
8. D. Range Compression : OFF
<Main Menu>
0 : Exit
< Audio Output Level >
Select
Audio Output
Level 1. 1
2. 2
3. 3
4. Return
(While disc stopped, or no disc.)
Display
the Main Menu.
TITLE
MENU
1
1. Pan & Scan:Plays in Pan & Scan mode
2. Letterbox: Plays in Letter Box mode
3. Return:
The display returns to “Main Menu”.
1. ON: When power is turned on, On-Screen Display messages such
as “Play” and “Pause” will always be displayed on the screen
for 5 seconds.
2. OFF: When power is turned on, On-Screen Display messages such
as “Play” and “Pause” will not be displayed on the screen.
3. Return: The display returns to “Main Menu”.
1. Minimum: Most compressed mode: TV broad-
casts, etc.
2. Standard: Mode recommended by software
creators for listening at low volumes.
3. OFF: Does not compress the dynamic range.
4. Return: The display returns to “Main Menu”.
1 2 3
4
1 2 3
6 4
7 8
5
0
Note:
≥ If “Pan & Scan” or “Letterbox” is already set in the
software, this setting is ignored.
Note:
≥ When it is difficult to hear comparatively quiet
sounds (such as movie dialogue), setting
“Minimum” will make those sounds easier to hear.
(Example:
“7. Audio Output Level”)
5. TV Mode
Set this when playing wide-screen video on a
conventional-size (4:3) TV.
[Default: Pan & Scan]
6. On-Screen Messages
This is to select On-Screen Display ( ➡ page 19) messages
which will be displayed when On-Screen Display is turned
off by pressing [OSD].
[Default: ON]
8. D. Range Compression
By compressing the range of the playback level (the
dynamic range), it is possible to maintain the impact of
audio even at low volumes.
This function only works with Dolby Digital encoded material.
[Default: OFF]
2
Select each setting menu.
3
Select each item.
4
Finish the Setting.
7. Audio Output Level
[Default: 2]
1. 1: Minimum Level
2. 2: Middle level
3. 3: Maximum level
4. Return: The display returns to “Main Menu”.
Note:
≥ We recommend that you select the default when you
use this player in the system configurations (
➡
pages 40–43), and adjust the volume control on the
display unit or stereo unit concerned to this player.
See the display unit operating manual for details.
• The setting is completed.
Note:
≥ To apply changes to settings, be sure to
press [0] at the end.
≥ After the user settings have been changed
and entered, the player returns to the start of
the disc and begins playback.
≥ When the disc has predetermined language
or other settings, the user settings are not
reflected.
RETURN TITLE
TRACK
CAR DVD PLAYER/RECEIVER
TITLE / CHAPTER
PWR
RET
OSD GRP
9
0
MENU
STOP
TRACK / SEARCH
PAUSE PLAY
EN TE R
SUBTITLE AUDIO ANGLE
REPEAT
1 2 3
4 5 6
7 8
[MENU]
[0]
Numeric
buttons
[1]–[8]
E
N
G
L
I
S
H
16
( ➡ page 22)