Panasonic CF-VDW07CRFM - Manual (Page 28)

28
1 Select [MeiWDS Setup Utility] in the following proce-
dure.
[start] - [All Programs] - [Panasonic]
2 Enter the Supervisor Password.
In the default setting, the Supervisor Password is set to
“supervisor”.
3
Set the password and AES Encryption settings.
If the setting between the computer and wireless dis-
play doesn’t confirm (e.g., the display has changed to
another one.), set it again in the following procedure.
Set AES Key Length.
<When setting AES Encryption to something other than
[Disable]>
Select [AES Key], and set the AES Key(s) using phrase
or binary, then select [OK].
Set AES Key Lifetime.
4
At the confirmation screen, select [Finish].
The wireless display settings cannot be set at the same
time as those of MeiWDS.
Set the AES Key setting after setting the wireless dis-
play. (
page 26)
When selecting on the taskbar, the menu is dis-
played.
[Password] and [Exit MeiWDS] are enabled when
adding the check mark for [Enable tray menu] in the
MeiWDS Setup Utility.
·Password : Set the same password as that is
set in [Password] of the MeiWDS
on [Wireless Display Setup Util-
ity] screen.
·About MeiWDS : The software version and copy-
right are displayed.
·Exit MeiWDS : Exit the program.
NOTE
MeiWDS Setup Utility
Changing the Wireless Display Settings