Philips SD AG-HPX171E - Manual (Page 26)

E-6
Basic shooting operations (continued)
Checking photos taken (REC CHECK)
In the shooting pause mode, press the REC
CHECK button.
This plays back about 2 seconds of the video and
audio of the most recently recorded clip before
returning to pause mode.
Note that this REC CHECK portion will also be
recorded to any equipment you have set up to
make backup recordings.
The REC CHECK function does not work in PC
and MCR mode.
The HD recording(1080i/50i (720P/60P))
settings are already made in the default mode.
(To view the current settings, see Page 42.)
P card access lamps
CAM mode (MCR)
Lights green:
Data can be saved onto the cards or loaded
from them.
Blinks green (slow):
No available space on card, card is write-
protected
Lights orange:
Slot that is the object of recording
Blinks orange:
Data is now being accessed.
Blinks orange (fast):
A card is now being recognized.
Both lamps blink orange:
Ejection of card during access
Off:
Cards have not been inserted or formatted.
Insertion of incompatible card.
PC mode (USB DEVICE)
Blinks orange: Data is now being accessed.
Off: A status other than access underway.
PC mode (139 DEVICE)
Blinks orange: Connected
Off: Not connected
•
•
PC mode (139 HOST)
Lights green:
Access standby.
Blinks orange:
Data is now being accessed.
Off:
Cards have not been inserted or formatted.
Insertion of incompatible card.
P card access lamp
Protecting against a possible erasure
Switch the write-protect switch of the P2 card to
[PROTECT].
Write-protect switch
Formatting P cards
1
Set the POWER switch to ON. (Page 19)

Press the mode button and set it to MCR
mode (the MCR lamp lights).
Thumbnails are displayed. •