Pioneer DEH P7200HD - Manual (Page 27)

Channel mode (channel select mode setting)
You have two methods for selecting a channel: by
number and by category. When selecting by number,
channels in any category can be selected. Select by
category to narrow your search down to only chan-
nels in a particular category.
1 Press M.C. to change the channel select mode.
Channel number (channel number select set-
ting)
—Category (channel category select setting)
Selecting a channel in the
channel category
1 Switch the channel select settings to
Category.
Refer to Selecting the XM channel select mode
on the previous page or
Channel mode (chan-
nel select mode setting) on this page.
2 Push M.C. up or down to select the de-
sired channel category.
3 Push M.C. left or right to select the de-
sired channel in the selected channel
category.
Displaying the Radio ID
1 Select the channel select settings to
Channel number.
Refer to Selecting the XM channel select mode
on the previous page or
Channel mode (chan-
nel select mode setting) on this page.
2 Push M.C. left or right to select
RADIO ID.
# If you select another channel, display of the ID
code is canceled.
# Display of the ID code repeats displaying
RADIO ID and the ID code one after the other.
SIRIUS Satellite Radio tuner
You can use this unit to control a SIRIUS Satel-
lite Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIR-
IUS operation manual.
Listening to SIRIUS Satellite Radio
4 2 3 1
5
1 SIRIUS band indicator
2 SIRIUS channel number indicator
3 SIRIUS preset number indicator
4 SIRIUS channel select setting indicator
Shows what channel select setting has been
selected.
CH is displayed when
Channel number is selected, and CAT is dis-
played when
Category is selected.
I.R is displayed during the Instant Replay
mode.
5 SIRIUS channel name
Shows the channel name of broadcast
channel.
Select a SIRIUS band.
1 Press BAND/ESC.
! Band can be selected from SR-1, SR-2 or SR-
3.
Select a channel.
1 Push M.C. left or right.
! If you push and hold M.C. left or right, you
can increase or decrease channel number
continuously.
! You can also perform tuning from a desired
channel category. (Refer to Selecting a chan-
nel in the channel category on page 29.)
Available accessories
En
27
English
Section
03