Step 3 : connecting to an amplifier/receiver, Hdmi av out digital audio out (optical) – Panasonic DMP-BBT01 User Manual
Page 12
12
VQT3W08
STEP 3 : Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
≥ Set “Digital Audio Output” (> 29).
≥ When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV via HDMI AV
OUT, then connect the TV and the amplifier/receiver. Please note, however, that the audio can only
be up to 5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, in order to enjoy TV’s sound by amplifier/receiver it is
also required to connect the amplifier/receiver and TV using an optical digital cable.
≥ Set “HDMI Audio Output” to “Off” (> 29).
≥ Set “Digital Audio Output” (> 29).
HDMI AV OUT
DIGITAL AUDIO OUT (OPTICAL)
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
Amplifier/receiver
HDMI cable (supplied)
HDMI cable
OPTICAL IN
Amplifier/receiver
Optical digital cable
DMP-BBT01_VQT3W08 _eng.book 12 ページ ２０１２年４月６日 金曜日 午後３時０分