Inserting the locking pin – Precor EFX534i t User Manual
Page 41
page 41
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
In Pause
mode, you
This is what happens...,
resume pedaling Returns to the program and the workout statistics continue from
where you left off.
press Reset
Displays the Workout Summary banner.
exceed time limit The EFX exits Pause mode, resets the displays, and turns off.
In Cool down
mode,
This is what happens...,
no pedaling
Enter Cool down, Pause mode. Workout time stops accruing
or slow pedaling and PEDAL FASTER appears on the display. If you enter Pause
is detected
mode, it is of limited duration. Check with staff personnel or
refer to
Custom Settings Mode on page 25 and Informational
Displays Prior to Shutdown on page 33.
you press Reset Displays the Workout Summary banner. See Reset on the
previous page.
it ends.
Displays the Workout Summary banner.
At the Workout
Summary
banner, you
This is what happens,...
press Reset
The workout statistics are reset to zero and the EFX shuts off.
INSERTING THE LOCKING PIN
To secure the EFX
after your workout, take the following steps:
1.
Locate the locking pin in its storage location under the ramp. Refer to
Diagram 25 on page 37.
2.
Remove the locking pin from its stored location and insert it into the roller
arm. Position the locking pin so that you insert it from the outside edge of the
ramp toward the inside edge.
3.
Firmly slide the locking pin through the holes in the roller arm. Be sure that the
locking pin is all the way through roller arm. Refer to Diagram 25 on page 37 .
Gently move the roller arm to make sure that it is secure.