Philips DVR2104 - Manual (Page 13)

5
User guide
Switch on
n
Confirm the safety notice has already carried out before switching on.
n
Check the conjunction of system, input, output and the power supply before
switching on.
n
Confirm the image standard (NTSC/PAL) and monitors are met the request.
n If there is correct, start the exterior equipments first.
n
If the DVR is shut down abnormally, no OSD mark will appear when switching on,
and the monitor image is black. The system will sort of HDD automatically,
after the sorting, it will continue to play the recording. The information in HDD
will affect the time of dislocation and arrangement, please wait patiently.
n If the system has already set the schedule recording and the system is just in the
schedule time, the system will start the schedule recording according to the
parameter automatically.
Shut down
n Shutting down normally will make system stop no work, do not shut down the
DVR when it is recording or playing, especially when it is under recording.
(Otherwise the system will start the automatic renew next time.)
n Press “=“ to stop recording or press “ 4” to stop playing before shutting
down, or return the system setting list and set the system in stopping alert,
then turn left the power control lock to shut off the machine. Do not shut off the
power supply when the system is under recording backup; otherwise the
finished records will be lose.
n
Pull out the power cable from the AC outlet if the DVR will not be used for a
long time.
Normal recording
n Connect all power supplies of related equipments before recording，make
sure the system has video input.
n Press “information” to look into the remaining space of HDD, if the space not
enough, please backup or overwrite.
n Check "recording parameter ” to set the image quality before recording. Also
you can press
“quality” to select it. The image quality cannot be changed
when the system is recording.
n Press “ = ” to start recording, the indicator will appear. Press “display”, red
indicators for quality, the current date and time will show on the monitor. Press
“display” again, the state of HDD will show on monitor.
n Don ’t start recording in the process of system setting. If the system is setting,
move the cursor to
“back” in system setting window to withdraw from the
system-setting window, then press
“record” to start recording.
n If HDD is full when the system is recording, and the system has already set
auto overwritten, the record will run without break. The system will overwrite
from the beginning. If the system has set to be manual recording, and the
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn