Philips MX5700D - Manual (Page 14)

14
English
Connections (optional)
Connecting a VCR or
Cable/Satellite Box
AUDIO
OUT S-VIDEO IN
VIDEO IN SCART IN
SCART OUT
DIGITAL
OUT
DIGITAL
IN
AUX
IN TV
IN LINE
OUT
AUDIO VIDEO
OUT
CVBS
S-VIDEO
FM ANTENNA
MW
L
R
~ AC MAINS
Pb
AUDIO
OUT
S-VIDEO
IN
VIDEO IN
2 4
3
SPEAKER SYSTEMS (8
Ω )
SURROUND
CENTER
FRONT
L
R
SL
SR
C
SUB-WOOFER
P-SCAN
ON OFF
ANT IN
TO TV
~ AC MAINS
SCART IN
1
VCR or
Cable/Satellite Box
Viewing and listening to the playback
1
Connect the VCR or Cable/Satellite Box to the
TV as shown.
2
Connect the DVD system’s AUX IN (R/L)
jacks to the AUDIO OUT jacks on the VCR or
cable/satellite box.
Before starting operation, press AUX/DI on
the remote to select “ AUX” in order to
activate the input source.
Using the VCR for recording DVDs
Some DVDs are copy-protected. You cannot
record or dub protected discs using a VCR.
3
Connect the DVD system’s CVBS jack to the
VIDEO IN jack on the VCR.
4
Connect the DVD system’s LINE OUT (R/L)
jacks to the AUDIO IN jacks on the VCR.
This will allow you to make analogue stereo
(two channel, right and left) recordings.
To view DVD playback while recording,
you must connect the DVD system to your TV
using the SCART (as shown above) or the
S-VIDEO connection.