Panasonic KV-S3065CW - Manual (Page 27)

27
Replacing Consumables
∫ Replacing paper feed roller module
1
Turn the power off and unplug the
power cord.
2
Use your hand to pull the front door
release towards you (
1).
Then open the front door completely
(
2).
3
Place your finger on the paper feed
roller block shaft and pull it towards you
to remove the paper feed roller block
from the magnet. (
1)
Push down the green levers and
remove the paper feed roller module
from the scanner by holding the green
levers. (
2)
≥ The paper feed roller block is attached by
a magnet.
≥ When moving the green levers, do not
apply pressure in any other direction than
the arrows.
They may break.
± : off position
Power switch
Front door
Front door release
(Inside the front door.)
1
2
2
Paper feed roller block shaft
Green levers