Planet Technology G.SHDSL.bis Bridge Router GRT-504 - Manual (Page 28)

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
5.2 Install the SHDSL.bis Router
!
To avoid possible damage to this Router, do not turn on the router before Hardware Installation.
y Connect the power adapter to the port labeled DC-IN on the rear panel of the product.
y Connect the Ethernet cable.
Note: This router supports auto-MDIX switching so both straight through and cross-over
Ethernet cable can be used.
y Connect the phone cable to the router and the other side of phone cable to wall jack.
y Connect the power adapter to power source inlet.
y Turn on the PC or NB, which is used for configuration the Router.
4-port router with complex network topology
27