Penpower WorldPenScan Pro - Manual (Page 13)

3-2 WorldPenScan
3.2 Scan Mode
3.2.1 Sentence Scan
1. Select the [Sentence Scan] mode from the [Scan Mode].
2. Select the language of the text that you would like to scan from the [Recognition Lan-
guage].
3. Open any word processor, for example Text Edit, and then click the location where you
would like to input.
4. Place a document on a flat surface and place the scan tip at the front of your desired scan
area. Aim the Scan Tip arrow at the center of the desired scan area, and then press and
drag the WorldPenScan pen in a straight line across the area like a highlighter. During the
scanning, please make sure the white auxiliary light is on.
5. Stop applying pressure to the pen to stop scanning. The text that the pen has scanned are
displayed in your word processor immediately.
Note: Penpower WorldPenScan is able to scan and recognize one row of characters at a
time. Please place the Scan Tip arrow at the center of the line.
. Image Scan: Check the [Image Scan] mode, the scanned image or word will be sent
to your computer in image format. Please refer to 3.2.3 Image Scan for more detailed
information.
. Original Image: display the scanned image. See 3.4 Displaying Original Image.
. Settings: provide General, Translation Online settings. See 3.5 Settings for more de-
tailed information.
3.2.2 Word Scan
1. Click the [Scan Mode] button to select
the [Word Scan] mode, an exten-
sion window will appear under the tool-
bar.
Tip: When first time switching to the Word
Scan mode, the Word Scan Guide
window will appear to guide you how
to use the Word Scan mode.