Panasonic DVD-K32 - Manual (Page 14)

14
RQT8
68
5
Changing the player settings
≥ Referring to page 14 to 15, change as required.
≥ The settings remain intact even if you switch the unit to standby.
≥ Underlined items are the factory preset.
∫ “DISC” tab
∫ “VIDEO” tab
1 2 3 4 5
Shows Setup menu. Select the tab. Select the item. Make the settings. Press to exit.
SETUP
Select
Register
Select
Register
Select
Register
SETUP
SETTING STATE Display the current setting of the items below
AUDIO
Choose the audio
language. ENGLISH (LANGUAGE OPTIONS) §1 ORIGINAL §2
OTHER---- §3
SUBTITLE
Choose the subtitle
language. AUTO §4 ENGLISH (LANGUAGE OPTIONS) §1
OTHER---- §3
MENUS
Choose the
language for disc
menus. ENGLISH (LANGUAGE OPTIONS) §1 OTHER---- §3
RATINGS
Set a ratings level to
limit DVD-Video play. Setting ratings (When level 8 is selected)
0 LOCK ALL: To prevent play of discs without ratings levels.
1 to 7:
To prohibit play of DVD-Video with
corresponding ratings recorded on them.
8 NO LIMIT
When setting a ratings level, a password screen is shown.
Enter the password with [
3 4] and [1], then press [ENTER].
Do not forget your password.
A message screen will be shown if a DVD-Video exceeding
the ratings level is inserted in the unit. Follow the on-screen
instructions.
PASSWORD
Change the
password for
“RATINGS”
(
➜ above).
1 Select “CHANGE” and press [ENTER].
2 Enter the current password with [
3 4] and [1], then press
[ENTER].
3 Enter the new password with [ 3 4] and [1], then press
[ENTER].
If “VERIFY” is displayed, please verify the password and
insert it again.
SETTING STATE Display the current setting of the items below
TV ASPECT
Choose the setting to suit
your television and
preference. (
➜ page 7,
Selecting aspect ratio)
4:3PAN&SCAN 4:3LETTERBOX
4:3ZOOM 16:9NORMAL
16:9SHRINK 16:9ZOOM
TV TYPE
Select to suit the type of
television. STANDARD CRT
LCD PROJECTION
PLASMA
NTSC DISC OUT §5,6,7
Choose PAL60 or NTSC
output when playing NTSC
discs.
NTSC: Output signals from NTSC discs remain as
NTSC.
PAL60: NTSC disc can be viewed on PAL television.
[Asia]: “NTSC” is the factory preset.
STILL MODE
Specify the type of picture
shown when paused. AUTO
FIELD:
The picture is not blurred, but picture quality is lower.
FRAME: Overall quality is high, but the picture may
appear blurred.
VIDEO OUT-SCART §5
Choose the video signal format to
be output from the SCART and
COMPONENT VIDEO OUT
terminals (
➜page 5)
VIDEO/YPbPr
S-VIDEO/YPbPr
RGB/NO OUTPUT
BLACK LEVEL §8
Change the black level of
the picture if you connected
a television through the
COMPONENT VIDEO
OUT terminals.
LIGHTER: When connected through VIDEO OUT or
S VIDEO OUT.
DARKER: When connected through COMPONENT
VIDEO OUT.
VIDEO OUT (I/P)
Select “PROGRESSIVE”
only if connecting to a
progressive output
compatible television. INTERLACE PROGRESSIVE
When you select “PROGRESSIVE”, a message screen
will appear.
≥ For progressive output, press [3] and then press
[ENTER].
≥ Press [RETURN] to cancel.
Chang
ing the p
la
y
e
r
settings
RQT8685-2B.fm Page 14 Tuesday, April 25, 2006 9:05 AM