Palsonic PMC-211 - Manual (Page 4)

LOCATION OF CONTROLS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18. SPEAKER
VOLUME CONTROL
DIAL SCALE
LED DISPLAY WINDOW
FM STEREO LED INDICATOR
CD SKIP/ REV BUTTON
CD PLAY / PAUSE BUTTON
CD SKIP/ FF BUTTON
CD PROGRAM BUTTON
CD REPEAT BUTTON
POWER ON BUTTON
POWER ON LED INDICATOR
FUNCTION SWITCH (RADIO/TAPE/CD)
HEADPHONE JACK
CD STOP BUTTON
BBS ON / OFF BUTTON
BAND SELECTOR SWITCH (FM ST/FM/AM)
CASSETTE DOOR 19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33. CASSETTE RECORD BUTTON
CASSETTE PLAY BUTTON
CASSETTE REWIND BUTTON
CASSETTE F.FWD BUTTON
CASSETTE STOP / EJECT BUTTON
CASSETTE PAUSE BUTTON
CASSETTE BUTTON COVER DOOR
CD DOOR
AC POWER CORD COVER
AC POWER CORD
SPEAKER TERMINALS
FM ANTENNA
BEAT CUT SWITCH
AC MAIN POWER SWITCH
TUNING CONTROL
SETUP BEFORE USE
OPERATING THE UNIT
1.
2.
Speakers Connection
Extend the SPEAKER WIRES and connect them to the SPEAKER TERMINALS Connect
the black wires to the black terminals Connect the black and grey to the red terminals.
Power Cord Connection
Before using, connect the AC Power Cord to the AC outlet, then turn on the MAIN POWER
switch of the unit.
When you first power on the unit, it will be in standby mode. You can press the POWER button on
the unit (or on the remote control) to switch the unit ON and OFF Pull the AC plug out of the wall
socket if you want to switch off completely.
POWER / STANDBY
1.
2.
3.
4.
Headphone jack is provided on the unit You can use headphone by inserting the headphone plug
to the socket It is recommended to start with a lower volume and gradually increase to a desired
level.
Press the POWER button on the unit (or remote control) to switch the unit on.
Select the sound source (CD, Radio or Tape) by switching the FUNCTION switch to
corresponding position.
Adjust the volume by the VOLUME control.
Press the POWER button to switch off the unit.
LISTEN THE MUSIC BY USING HEADPHONE
BBS SYSTEM
You can Dress the BBS button to enhance the level of bass.
2