Polaroid BLL Generator - Manual (Page 26)

Introduction 27
Chapter 5: Principle of Operation
This section explains how the Windows BLL Generator and WinRascol work together to produce film
output.
Introduction
WinRascol consists of two software components:
•
WinRascol32: The queue and print manager. It queues print jobs and sends them to the film
recorder. WinRascol32 is the same program on Windows 95, Windows 98 and Windows NT.
•
WinRascol Printer Driver, or Windows BLL Generator: The printer driver is used when you
invoke the Print command from within a Windows application. Due to architectural differences
between Windows 95/98 and Windows NT, there need to be separate printer drivers for each
type of operating system.
There are several different ways to use WinRascol:
•
The user on a PC with a film recorder attached can print by:
•
Printing directly from an application with the WinRascol Printer Driver, or
•
Adding image files directly to the queue with WinRascol32.
•
The user on a PC without a film recorder can:
•
Print from an application with the Windows BLL Generator to make BLL files, or
•
Save images in one of the formats that WinRascol supports directly.