Panasonic DPMC210 - Manual (Page 76)

9. Programmable Features
76
9.9 Network features (LAN connection only)
These features can be programmed only through the web browser interface.
Feature Tab Selection
Setting the LAN
features [ LAN Feature] Enter the LAN feature settings. See page 73 for details.
Setting the community
name for SNMP [ SNMP] Enter the SNMP community name. Consult your
service provider or network administrator for details.
Setting the location
where you use this unit [ SNMP] Enter the location information of the unit.
Displaying the link local
address [ IPv6] The link local address will be displayed.
Displaying the IP
address for auto
configuration [ IPv6] The IP address for auto configuration will be displayed.
Setting the IP address
for IPv6 [ IPv6] Enter the IP address for IPv6. Consult your service
provider or network administrator for details.
Setting the default
router for IPv6 [ IPv6] Enter the default router address for IPv6. Consult your
service provider or network administrator for details.
Setting the FTP server
information [ FTP Feature] Enter the FTP server information to carry out the
following functions:
–
Printing a file stored on an FTP server (page 33).
– Sending scanned images to a folder on an FTP
server (page 37).
– Saving the fax document in a folder on an FTP
server (page 52).
Setting the e-mail server
information [ E-Mail Feature] Enter the e-mail server and SMTP server information to
carry out the following functions:
–
Sending scanned images from the unit via an e-mail
(page 36).
– Saving the fax document as an e-mail attachment
(page 52).
Registering the e-mail
destinations (via an e-
mail server) [ E-Mail Feature] Register e-mail destinations (up to 300 destinations) for
the unit. See page 66, 71 for details.
Setting the error notify
feature [ Error Notify] [ Enabled]: The unit will send an e-mail to registered
destinations when a problem occurs.
[
Disabled] (default): Deactivates this feature.
Setting the information
for the error notify
feature [ Error Notify] Enter the e-mail server and SMTP server information to
send error notification e-mails to.