Safety & troubleshooting, Safety and troubleshooting information – Philips 140S User Manual

Page 2

Advertising
background image

Safety and Troubleshooting Information

Safety Precautions and Maintenance

•

Installation Locations

•

Correct Handling of the LCD

Monitor

•

FAQs

•

Troubleshooting

•

Regulatory Information

•

Other Related Information

Safety precautions and maintenance

WARNING: Use of controls, adjustments, or procedures other than those
specified in this documentation may result in exposure to shock, electrical
hazards, and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor:

Unplug the monitor, if you are not going to use it for an extensive period of time.

●

Unplug the monitor, if you need to clean it with a slightly damp cloth. Wiping the screen with a dry
cloth is possible when the power is off. However, never use alcohol, solvents, or ammonia-based
liquids.

●

Consult a service technician if the monitor does not operate normally when following the instructions
in this manual.

●

The casing cover should be opened only by qualified service personnel.

●

Keep the monitor out of direct sunlight and away from stoves or any other heat source.

●

Remove any object that could fall into the vents or prevent proper cooling of the monitor’s electronics.

●

Do not block the ventilation holes on the cabinet.

●

Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture.

●

When positioning the monitor, make sure the power plug and outlet are easily accessible.

●

If turning off the monitor by detaching power cable or DC power cord, wait for 6 seconds, then attach
the power cable or DC power cord for normal operation.

●

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or
excessive moisture.

●

When positioning the monitor, make sure the power plug and outlet are easily accessible.

●

Consult a service technician if the monitor does not operate normally when operating instructions of this
manual are followed.

RETURN TO TOP OF THE PAGE

Installation Locations

Avoid Heat and Extreme Cold

●

Do not store or use the LCD monitor in locations exposed to heat, direct sunlight, or extreme cold.

●

Avoid moving the LCD monitor between locations with large temperature differences. Choose a site

●

Safety & Troubleshooting

file:///D|/Philips LCD/english/140S/SAFETY/SAFETY.HTM (1 of 3) [1/20/2001 3:01:56 PM]

Advertising