Installation guide, Remove the unit, Install removable face plate – Panasonic CQ-DP101W EN User Manual

Page 9

Advertising
background image

E
N

G

L

I

S
H

14

CQ-DP151/DP101W

31

E
N

G

L

I

S
H

13

CQ-DP151/DP101W

30

Installation Guide

(Continued)

Remove the removable face plate.
1 Press [

'] (release button). The removable

face plate will be released.

2 Pull on the right side of the unit.

1

2

Remove the Unit

7 Trim plate

<

<

SOURCE

REP

RANDOM

PWR

Remove the trim plate 7 with a screwdriver.

Pull out the unit while pushing down the lock
lever with a screwdriver.

Remove the unit pulling with both hands.

1

Contact

Main unit

Lock lever

Screwdriver

Install Removable Face Plate

1 Slide the left side of the removable face plate in

place.

2 Press the right end of the removable face plate

until “click” is heard.

Cautions:
≥

This face plate is not water-proof. Do not expose it to water or excessive moisture.

≥

Do not remove the face plate while driving your car.

≥

Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.

≥

Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical
contacts.

≥

If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.

≥

Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or
it might be damaged.

2

1

<

Plastic tab

2

3

4

Switch off the power of the unit.

Lock lever

Cutout

Release button

Advertising