Panasonic NV-SJ400A - Manual (Page 9)

9
Setting Up
Auto Tuning Using the On Screen Display For
Australia
Introduction
The VCR is tuned automatically by Plug in Auto Tuning.
However, Auto Tuning using the On Screen Display should
be performed according to the following method if necessary.
Preparations
≥
Confirm that the TV is on and the VCR viewing channel is
selected.
≥ Turn on the VCR and select any programme position
except A1 or A2.
Operations
1
Press the MENU button V to
display the Main menu on the
TV screen.
2 Press the Cursor buttons (34 34 34 34 34 ) T
to select “TUNER PRESET” then
press the ENTER button U.
3 Press the Cursor buttons (34 34 34 34 34 ) T
to select “AUTO TUNE” then press
the Cursor buttons (2 1
2 1 2 1 2 1 2 1 ) T to
start the Auto Tuning.
≥
When Auto Tuning is completed,
the On Screen Display
disappears and programme
position 1 is selected.
Storing TV Broadcasts in Your VCR
Notes:
≥
Auto Tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position. Other programme positions are skipped.
≥ Auto Tuning takes five or more minutes to complete its
search.
≥ If the VCR is not correctly tuned by Auto Tuning, follow the
procedure on the next page.
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
SELECT
END : ,ENTER
:MENU
MENU
CH 1
CLEAR
(OFF)
COUNTRY (AUSTRALIA)
AUTO TUNE
SEARCH
(3)
FINE
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
SELECT
END : ,ENTER
:MENU
MENU
END :MENU SELECT:
TUNER PRESET
CH 1 SEARCH
END: MENU
100 µ
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
The number displayed here is
the number of channels still
to be auto tuned.
The VCR is fitted with its own tuner (just like a normal TV)
and can be preset to receive up to 99 TV broadcast stations.
Pre-programmed TV Channels (Australia only)
The local TV broadcast channels 2, 7, 9, 10 and 28 are
factory-preset in this VCR.
That is, if you can receive television broadcasts on VHF
channels 2, 7, 9, 10 and UHF channel 28, these are already
tuned on the programme positions with the matching
numbers. However, it is possible to cancel these settings and
tune the local TV broadcast channels to any desired
programme position.
Auto Tuning Using the On Screen Display For
New Zealand
When you use this VCR in New Zealand, need to operate as
follows:
Preparations
≥
Confirm that the VCR is on.
≥ Confirm that the TV is on and the VCR viewing channel is
selected.
Operations
1
Press the MENU button V to
display the Main menu on
the TV screen.
2 Press the Cursor buttons (34 34 34 34 34 ) T
to select “TUNER PRESET” then
press the ENTER button U.
3 Press the Cursor buttons (34 34 34 34 34 ) T
to select “COUNTRY” then press
the Cursor buttons (2 1
2 1 2 1 2 1 2 1 ) T to
select “NEW ZEALAND”.
4 Press the Cursor buttons (34 34 34 34 34 ) T
to select “AUTO TUNE” then press
the Cursor buttons (2 1
2 1 2 1 2 1 2 1 ) T to
start the Auto Tuning.
≥
When Auto Tuning is completed,
the On Screen Display
disappears and programme
position 1 is selected.
CH 1
CLEAR
(OFF)
COUNTRY (AUSTRALIA)
AUTO TUNE
SEARCH
(3)
FINE
END :MENU SELECT:
TUNER PRESET
CH 1
CLEAR
(OFF)
COUNTRY (NEW ZEALAND)
AUTO TUNE
SEARCH
(3)
FINE
END :MENU SELECT:
TUNER PRESET
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
SELECT
END : ,ENTER
:MENU
MENU
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
SELECT
END : ,ENTER
:MENU
MENU
CH 1
CLEAR
(OFF)
COUNTRY (NEW ZEALAND)
AUTO TUNE
SEARCH
(3)
FINE
END :MENU SELECT:
TUNER PRESET
CH 1 SEARCH
END: MENU
100 µ
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
AUSTRALIA 0–12 45– 470MHz 28 –69
NEW ZEALAND 1–11 45– 470MHz 21 –69
VHF CATV UHF
Channels that can be Received
The number displayed here is
the number of channels still
to be auto tuned.