Philips SNB6500 - Manual (Page 10)

EN
10
Connect PC to Wireless Router: Wired
Take the supplied Ethernet cable.
Connect one end of the Ethernet cable to LAN1 port on SNB6500.
Connect other end of Ethernet cable to your PC network card.
Network card must be configured to obtain an ip address automatically
(see chapter “Configuring Client PC”)
Light 1 on the front will turn on.
LAN4 To Modem 12V=1A Reset LAN3 LAN2 LAN1
Wireless Base Station 11g True Turbo
1 2 3 4 Wireless Internet Modem Power