Philips FW-M355 - Manual (Page 24)

24
English
3139 115 21402
Tape Operation / Recording
CD Synchronized start recording
1 Press CD 1/2/3 to select the disc.
● Press í or ë to select the desired track to
start recording.
● You can program the tracks in the order you
want them to be recorded (refer to “CD
Operation - Programming the disc tracks”).
2 Press RECORD to start recording.
➜ The disc will start playback automatically.
To select another track during recording
1 PressÉÅ to interrupt recording.
2 Pressí or ë to select the desired track.
3 PressÉÅ again to resume recording.
To stop recording
● Press Ç.
➜ Recording and disc playback will stop
simultaneously.
Dubbing tapes
1 Press TAPE to select tape mode.
2 Load the prerecorded tape in tape deck 1.
● You can set the tape to the desired passage
where recording will start.
3 Press RECORD.
➜ Playing and recording will start simultaneously.
➜ "
DUB" is displayed.
● Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
● Press Ç.
Notes:
– Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
pg 001-031/M355/37-Eng 4/17/02, 12:55 PM 24