Panasonic Vieta TX-32LXD70A - Manual (Page 11)

Advanced
Menu Item Adjustments / Confi gurations (alternatives)
VIERA
Link
VIERA Link Control Controls the connected Panasonic equipment
“Easy control only with VIERA remote control” (p. 31)
“Speaker control” (p. 31) •
You can also access VIERA Link Menu directly using the VIERA Link button on the
remote control. Speaker Selection
Picture
Viewing Mode Basic picture mode (Dynamic / Normal / Cinema / Auto) •
Set for each input signal
Contrast, Brightness,
Colour, Sharpness
Adjusts colour, brightness, etc. for each picture mode to suit your taste
Tint Adjusts tint of image •
For NTSC signal reception only
Colour Balance Chooses the colour balance of the entire image (Cool / Normal / Warm)
Colour Management Automatically adjusts colours to vivid ones (Off / On) •
Not valid on PC signal
P-NR
Picture Noise Reduction
Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto) •
Not valid on HDMI, PC signal or DVB
MPEG NR Automatically reduces noise for watching DTV, DVD and VCD (Off / Min / Mid / Max)
3D-COMB
Automatically makes still pictures and slow pictures look more vivid (Off / On) •
For PAL or NTSC signal reception only •
Not valid on S-Video, components, PC and HDMI •
Cannot be used with DVB
Reset Picture Default Press the OK button to reset the present Picture Mode to the default settings
Sound
Mode Basic sound mode (Music / Speech)
Bass Adjusts the output level of deep bass
Treble Adjusts the output level of high-pitch, shrill sound
Balance Adjusts volume level of right and left speakers
Headphone Volume Adjusts the volume of the headphones
Surround Surround sound settings (Off / On)
Volume Correction Adjusts volume of individual channel or input mode
Audio Preference
Selects the initial setting for Audio tracks (Dolby Digital / MPEG)
If programme has both Dolby Digital and MPEG audio tracks, priority is given to what you select
Dolby Digital : A method of coding digital signals developed by Dolby Laboratories. Apart
from stereo (2ch) audio, these signals can also be multi-channel audio.
MPEG : An audio compression method that compresses audio to small size
without any considerable loss of audio quality. •
DVB mode only
SPDIF Selection
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
terminal (Auto / PCM)
Auto: Dolby Digital is output as Dolby Digital Bitstream. MPEG is output as PCM.
PCM: Dolby Digital is output as PCM. MPEG is output as PCM. •
DVB mode only
MPEG Audio Level
Normally, MPEG sound is larger than Dolby Digital one
You can adjust the audio level of MPEG as the initial setting •
0dB to -12dB in -2dB reductions •
DVB mode only
HDMI1 Input
Select to fi t the input signal (Auto / Digital / Analogue) (p. 29)
Auto
: Automatic detection of digital or analogue sound source
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection •
HDMI input mode only •
HDMI2 terminal is for digital signal only •
No setting for HDMI2 available
Reset Sound Default Press the OK button to reset the present Sound Mode to the default settings
Menu Item Adjustments / Confi gurations (alternatives)
Setup
DVB Favourites Edit Creates list of favourite programmes (p. 23)
Tuning Menu
Auto Tuning Automatically sets the channels received in the area (p. 24)
Analogue
Programme Edit
Edits analogue channels (p. 25)
DVB Manual
Tuning
Sets the DVB channels manually (p. 25)
Analogue
Manual Tuning
Sets the analogue channels manually (p. 25)
Add New DVB
Services
Adds new DVB services (p. 25)
New Service
Message
Selects whether to give a notifi cation message when a new DVB service is found (p. 25)
DVB Signal
Display
Checks the DVB signal condition (p. 25)
Off Timer Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Teletext Teletext display mode (TOP (FASTEXT) / List) (p. 16)
Shipping Condition Resets all settings, for example, when moving house (p. 26)
System Update Downloads new software to TV (p. 23)
Input Labels Labels or skips each input terminals (p. 27)
Banner Display
Timeout
Sets how long the information banner (p. 11) stays on screen •
0 (No display) to 10 sec. in 1-sec. increments
VIERA
Link Settings
VIERA Link Sets to use VIERA Link functions (Off / On) (p. 30)
Power off Link Set to “Set” to use Power off Link function (No / Set) (p. 31)
Power on Link Set to “Set” to use Power on Link function (No / Set) (p. 31)
Region Select
Selects the region where you live to adjust the standard time (NSW/ACT / Victoria /
Queensland / South Australia / Western Australia / Nothern Territory / Tasmania)
(p. 23)
Daylight Saving Time
Select time offset from the standard time for Summer Time
(Auto / Off / +1/2 Hr / +1 Hr) (p. 23) •
Set to “Auto” normally
Software Licence Displays the software licence information
System Information Displays the system information of this TV
20 21
■
Menu list
•
How to Use Menu Functions
(picture, sound quality
, etc.)
How to Use Menu Functions
■
Menu list
•
A different menu will be displayed while PC or DVI to HDMI adapter cable is used. (p. 28 and p. 29) •
Only available items can be selected.