PACKARD BELL LJ77 - Manual (Page 46)

36 Chapter 2
The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default
and suggested parameter settings.
Parameter Description Submenu Items
Advanced CPU
Control Enter the Advanced CPU Control menu. • P-States (IST)
• Boot performance mode
• Thermal Mode
• CMP Support
• Use XD capability
• VT Support
• SMRR Support
• C-States
• Enhanced C-States
• C-State Pop Up Mode
• C-State Pop Down Mode
• C4 Exit Timing Mode
• Deep C4
• Hard C4E
• Enable C6
• EMITM
• Bi-directional PROCHOT#
• Dynamic FSB Switching
• Turbmo Mode
• ACPI 3.0 T-States
• DTS
• DTS Calibration
• Thermal Trip Points Setting
Platform Power
Management Enter the Platform Power Management
menu. • PCI Clock Run
Break Event Enter the Break Event menu • Storage Break Event
• PCIE Break Event
• PCI Break Event
• EHCI Break Event
• UHCI Break Event
• HDA Break Event
ACPI S3 Enable or Disable ACPI S1/S3 Sleep State. N/A
Wake on PME Disable or Enable wake up when the
system power is off and a PCI Power
Management Enable wake up event occurs. N/A
Wake on Modem
Ring Disable or Enable wake up when the
system power is off and a modem attached
to the serial port is ringing. N/A
Quickly S4
Resume Disable or Enable optional quick boot from
S4 Resume. N/A
Auto wake on S5 Disable or Enable auto wake up by date
and time or at a fixed time everyday. N/A