Panasonic NV-VHD1EC - Manual (Page 16)

16
Repeat Playback (DVD, VCD, CD, MP3)
 Press |REPEAT| during playback.
The display changes as illustrated.
DVD
CHAPTER TITLE OFF
Video CD TRACK DISC OFF
CD TRACK DISC OFF
MP3 TITLE FOLDER OFF
Note: Repeat playback does not work if the elapsed playback time is not shown on the unit’s display.
There is no mode for repeating the whole DVD.
Repeat of a Video-CD (VCD)
 Press Stop
< < < < < during playback until PBC PLAY disappears from the display.
 Enter the number of the desired track.
 Press |REPEAT| (to Exit Repeat mode press Stop
< < < < < ).
A-B Repeat Playback (DVD, VCD ,CD, MP3)
You can repeat a section between points A and B within a title or track.
 Press |A-B REPEAT| during playback.
 Press |ENTER| at the starting point (A).
 Press |ENTER| at the finishing point (B).
To cancel this function, press |A-B REPEAT| and wait until the is switched off. The unit automatically
determines the end of a title/track as point B, when the end of the title/track is reached.
Note: A-B repeat playback does not work if the elapsed playback time is not shown on the unit’s display.
Resume function (DVD, VCD, CD, MP3)
 Press Stop
< < < < < during playback, the unit remembers the position.
 Press Playback while symbol [
] in the DVD display is flashing.
Playback restarts from the position you stopped it.
Cancel the Resume function
 Press Stop
< < < < < during playback.
 Press Stop
< < < < < until [
] disappears from the DVD’s display.
Note: The resume function does not work if the playback time is not displayed.
The position is cleared when the disc tray is opened or the unit is switched to standby.
Replaying a scene (DVD, VCD, CD, MP3)
 Press |REPLAY| during playback.
The player skips back a few seconds each time, to replay parts of scenes.
Note: You cannot skip beyond the beginning of a track or title. This feature doesn’t work with some discs.
Skipping chapters or tracks (DVD, VCD, CD, MP3)

Press SKIP B C during playback or while paused.
Each press increases the number chapters or tracks skipped.
POSITION MEMORY function (DVD, VCD, CD, MP3)
This function allows you to memorise a position to start from even after switching the unit to standby or changing discs.
You can memorise positions for up to five different discs at time.
 Press |POSITION MEMORY| during playback.

Press Stop < < < < < to clear the position before playback.
Start playback after switching to standby

Press Playback to start playback from the memorised position and the position is cleared.
DVD Playback
RQTD0035-A
REPEAT CHAPTER
REPEAT TITLE
REPEAT OFF
SET POSITION A
SET POSITION B
CHAPTER/TRACK CHAPTER/TRACK CHAPTER/TRACK
Play position
twice once once twice