Philips BDP2985 - Manual (Page 17)

17
English
EN
4 Change settings
This section helps you change the settings of
this player.
Note
• You cannot change a menu option that is grayed out.
• To return to the previous menu, press . To exit the
menu, press .
Picture
1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
• [TV display]: Select a picture display
format to fit the TV screen.
• [HDMI video]: Select an HDMI video
resolution.
• [HDMI Deep Color]: Display colors
with more shades and hues when
the video content is recorded in
Deep Color and the TV supports this
feature.
• [Picture settings]: Select a predefined
color setting.
1
2
3
• [Watch 3D video]: Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a
3D TV through HDMI.
Note
• If you change a setting, make sure that the TV supports
the new setting.
Sound
1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
• [Night mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
• [HDMI Audio]: Set an HDMI audio
format when this player is connected
through HDMI.
• [Digital Audio]: Select an audio format
for the sound output when this
player is connected through a digital
connector (coaxial).
• [PCM Downsampling]: Set the
sampling rate for PCM audio output
when this player is connected through
a digital connector (coaxial).
Note
• Night mode is only available for Dolby encoded DVD
and Blu-ray discs.
Network (installation,
status...)
1
Press .