Petsafe UL-275 - Manual (Page 2)

UL-275 Receiver
The UL-275 Receiver contains electronics to detect the magnetic fi eld carried
by the containment boundary wire, translates them, and delivers an static
correction. The static correction is delivered through two contact points that
touch the dog’s neck.
There are two sets of contact points that can be used on your receiver. The
longer contact points should be used on dogs with long hair.
The UL-275 Receiver is enclosed in a waterproof case and is mounted on a
polypropylene collar. The collar will fi t a dog with a neck size varying from 9
to 22 inches.
The UL-275 Receiver contains a LED indicator light. The light acts as a low
battery light and confi rms which one of fi ve correction levels are set.
The receiver is equipped with memory backup. After you replace the batteries
in the receiver, you will not have to reset the correction level. The LED
indicator light will fl ash for the correction level last set.
Inserting the Battery Module in the Receiver
Remove the Battery Module From the Receiver - Insert a coin into the slot just
below the white arrow. Turn the coin counter-clockwise, and remove the
battery module.
2