Philips HTS5510C - Manual (Page 12)

12
Viewing and listening to the
playback
1
Connect the VCR or Cable/Satellite Box
to the TV as shown.
2
Connect the DVD system’s AUX IN
(R/L) jacks to the AUDIO OUT jacks on
the VCR or cable/satellite box.
Press SOURCE to select “
AUX/
ANALOG” in order to activate the input
source.
Optional Connections
Connecting a VCR or
Cable/Satellite Box
FM
ANT
S-VIDEO
L
R
MW
ANT
PR PB Y
COMPONENT
VIDEO OUT
AUX-IN TV-IN LINE-OUT
VIDEO
COAXIAL
DIGITAL IN
TO AV SUBWOOFER
~ AC MAINS
4
1
3
2
VCR or Cable/
Satellite Box
Using the VCR for recording DVD
playback
Some DVDs are copy-protected. You
cannot record or dub protected discs
using a VCR.
3
Connect the DVD system’s S-VIDEO
jack to the S-VIDEO IN jack on the VCR.
4
Connect the DVD system’s LINE OUT
(R/L) jacks to the AUDIO IN jacks on
the VCR.
This will allow you to make analog stereo
(two channel, right and left) recordings.
Before recording, set the volume level of
the DVD system to level 1 and below, in
order to enable sound output from the
LINE OUT sockets.
To view DVD playback while
recording,
you must connect the DVD system to
your TV using a VIDEO OUT (as shown
above) connection.
DVD System