Pioneer AVH-P7500DVD - Manual (Page 57)

Watching the TV tuner
1 2 3 4
5
These are the basic steps necessary to operate
the TV. More advanced TV operation is ex-
plained starting on the next page.
1 Source icon
Shows what the source has been selected.
2 Band indicator
Shows which band the TV tuner is tuned to.
3 Preset number indicator
Shows what preset has been selected.
4 Channel indicator
Shows which channel the TV tuner is tuned.
5 Preset list display
Shows the preset list.
1 Touch the source icon and then touch
TV to select the TV.
# When the source icon is not displayed, you
can display it by touching the screen.
2 Touch the screen to display the touch
panel keys.
3 Touch BAND to select a band.
Touch BAND repeatedly until the desired band
is displayed, TV1 or TV2.
4 To perform manual tuning, touch c or
d shortly.
The channels move up or down step by step.
# You can also perform manual tuning by mov-
ing the joystick left or right.
5 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by touching either
c or d shortly.
# If you keep touching c or d you can skip
broadcasting channels. Seek tuning starts as
soon as you release the keys.
# You can also perform seek tuning by holding
the joystick left or right.
Note
If you do not use the touch panel keys for 30 sec-
onds, they will be hidden automatically.
TV tuner
En
57
Section
11
TV
tuner