Power scheme, Switch to dim, Switch to stand-by – Psion Teklogix Win CE 4.2 User Manual
Page 37: Figure 2.5 power schemes: switch to dim menu, Ac power battery power, Table 2.2 power schemes default values
Psion Teklogix NETBOOK PRO Win CE 4.2 User Manual
19
Chapter 2: Getting Started
Power Properties
The following are the default values for the power schemes options:
Power Scheme
This dropdown menu allows you to identify whether the unit is using AC Power or
Battery Power.
Switch To Dim
During the Dim state the backlight brightness is turned down after the specified time
has elapsed, if the NETBOOK PRO does not receive any user input, including activ-
ities such as a screen tap—any user-initiated activity. When the NETBOOK PRO
enters the Dim state, it begins to monitor the time specified in the Switch to Stand-By
menu.
Figure 2.5 Power Schemes: Switch To Dim Menu
Press any button to bring the unit out of Dim state.
Switch to Stand-By
In Stand-By state, the NETBOOK PRO turns off the display, but the programs and
NETBOOK PRO hardware remain active. System activity includes computer
activity such as serial data, an activity initiated by an application, and so on—any
Option
AC Power
Battery Power
Switch
to Dim
After 1 minute
After 30 seconds
Switch
to Stand-By
Never
Never
Switch to Suspend
Never
After 10 minutes
Table 2.2 Power Schemes Default Values