Installing the rtm isdn 1500 card -2, Installing the rtm isdn 1500 card – Polycom DOC2557B User Manual
Page 26
Advertising
Chapter 2- Component Installation & Replacement
2-2
Installing the RTM ISDN 1500 Card
Prior to adding the RTM ISDN 1500 card you must have your ISDN
product license available. For more information see, RMX 1500/2000/
Getting Started Guide, "Procedure 2: Product Registration” on page
2-20
.
1
Ensure that the power switch on the RMX 1500 is turned OFF (O).
2
Loosen the captive screws that fasten the card to the MCU.
3
Slide in the RTM ISDN 1500 card.
4
Insert the card into the slot and tighten the captive screws on each
side of the rear panel of the card, securing the RTM ISDN card to
RMX.
Advertising