Panasonic Pedestal for Wide Plasma Display TY-ST50PX20 - Manual (Page 8)

8
English
8 8 8
Attach to the display console
1. Insert the poles into the holes in the display console.
Display console
Rear of display
Display console
Rear of display
Claw
2. Remove terminal cover.
*
Position the side of the pedestal with the model no. label to the rear. Push the
assembly into the display until it stops.
Simultaneously hold
in the two claws and
remove the terminal
cover.
Display console
Rear of display
Model no. label
Stamped
triangular mark
Display console
Rear of display
Long screws Long screws
3. Fasten with screws
Securely fasten using long screws .
* Work on a level and stable surface.
5. Fit the terminal cover. 4. Connect cables
(Example of connecting cable routing)
Display console
Rear of display
Clamps
(Included with display)