Panasonic DVD-S24 - Manual (Page 4)

R
Q
T7
240
4
STEP 1 The remote control
≥ Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
≥ Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.
≥ Turn off all equipment before connection and read the appropriate operating instructions.
≥ Connect the terminals of the same color.
∫ Connect the AC power supply cord last
Conserving power
This unit consumes a small amount of power, even
when it is turned off (1 W). To save power when the
unit is not to be used for a long time, unplug it from
the household AC outlet.
[The\Middle\East\
≥ Use the AC power supply cord that matches the
socket for the area you live in.
Turn on the television and select the appropriate video input on the television.
To change these settings later
Select “QUICK SETUP” in “Others” tab ( ➜ page 10).
∫ Batteries ≥ Insert so the poles (i and j) match those in the
remote control.
≥ Do not use rechargeable type batteries.
Do not:
≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese
batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte
leakage which can damage items the fluid contacts
and may cause a fire.
Remove if the remote control is not going to be used
for a long period of time. Store in a cool, dark place.
∫ Use
Aim at the remote control sensor, avoiding obstacles,
at a maximum range of 7 m (23 feet) directly in front
of the unit.
R6/LR6, AA, UM-3
STEP 2 Connection to a television
R L
COMPONENT
VIDEO IN
AUDIO IN or VIDEO
IN
S VIDEO
IN
AUDIO IN
R L
Audio/video
cable (included)
VIDEO IN or S VIDEO IN
S video cable §
COMPONENT VIDEO IN
Video
cables
§ When using this connection, the audio cable
(red and white plugs) should also be
connected.
To enjoy progressive video
Connect to a progressive output
compatible television.
1 Select “Enable” in the progressive
output setting in QUICK SETUP
(
➜ see below).
2 Set “Video Output Mode” in Picture
Menu to “480P” ( ➜ page 9).
All Panasonic televisions with 480P input
connectors are compatible. Consult the
manufacturer if you have another brand
of television.
You can connect the audio cable to the 2-
channel audio input terminals of an
analog amplifier or system component to
enjoy stereo.
Audio/video
cable
(included) Not used
Television
Back of the unit
WITH WITH
\U.S.A.,\Canada\and\units\with\PX\printed\on\the\outer\packaging\
≥ Select “Darker” from the “Black Level Control” in the “Video”
tab ( ➜ page 10).
AC IN
AC power supply cord
(included)
To household AC outlet
[For[Saudi]Arabia\
For units with PX printed on the outer packaging
If the power plug does not fit your AC
outlet, use the power plug adaptor
(included).
If it still doesn’t fit, contact an electrical
parts distributor for assistance.
COAXIAL IN
Amplifier with a
built-in decoder or a
decoder-amplifier
combination
Coaxial cable
Back of the unit
∫ Enjoying multi-channel surround sound
Change “PCM Digital Output”,
“Dolby Digital”, “DTS Digital
Surround” and “MPEG
§ ” in “Audio”
tab ( ➜ page 10).
§ MPEG: [The\Middle\East,\South\Africa,\Russia,\Australia\and\N.Z.]
STEP 3 QUICK SETUP
1 2 3 4 5
Power ON. Shows QUICK
SETUP screen. Follow the message
and make the settings. Press to finish
QUICK SETUP. Press to
exit.
DIRECT NAVIGATOR PLAY LIST
MENU TOP MENU
DISPLAY
SUBTITLE AUDIO ANGLE/PAGE SETUP
PLAY MODE SLEEP ZOOM GROUP
RETURN
ENTER
AV ENHANCER
ADVANCED
SURROUNDPICTURE MODE REPEAT
FL SELECT OPEN/CLOSE
SETUP
ENTER
RETURN
ENTER
SETUP
The
re
mote contr
o
l/
Connect
ion to a tel
e
vi
sio
n
/Q
UICK SE
T
U
P