Pioneer AVH-P6400 - Manual (Page 42)

TV Tuner
En 42
09
Section
Recalling broadcast stations
Press
5 or ∞ to select a
Preset CH .
Changing a band
Press BAND to select the desired band.
Press BAND repeatedly to switch between the
following bands:
TV 1
= TV 2
TV menu
The TV menu has the following functions:
BSSM (best stations sequential memory)
P.CH MEMORY (preset channel memory) (Refer
to page 33.)
Press
BSSM repeatedly to turn BSSM on or off.
When finished, the display switches to the pre-
set channel list mode.
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned.
BSSM (Best Station Sequential
Memory)
The BSSM function automatically memorizes
strongly transmitted broadcast stations in order
from the lowest channel up.
1 Press BAND/ESC to display the BAND you
want to use for BSSM.
2 Select BSSM from the TV MENU, and
press A.MENU .
BSSM adjustment indications are displayed.
3 Press
5 to turn
BSSM on.
BSSM begins to flash. While BSSM is flashing
the six strongest broadcast frequencies will be
stored in order of their signal strength. When
finished,
BSSM stops flashing.
• To cancel the storage process, press
∞
.
Notes
• Up to 12 stations can be memorized in 1
Band.
• In regions where reception of no more than 12
station is possible, previously memorized
stations may remain in memory.