Paradyne M/HDSL Standalone Termination Unit HOTWIRE 7986 - Manual (Page 114)

Cables and Pin Assignments
C-4 7986-A2-GB20-10 December 1998
COM Port Interface Cable
The COM port connects to either a PC or to an ASCII terminal or printer for
alarms. The COM port-to-PC cable is a 14-foot, 26 AWG, 8-conductor cable with
an 8-position modular plug keyed connector and a DB9 socket connector
(Figure C-3). The COM port connector is an 8-position keyed modular jack
(Table C-3). The data signals on this port are referenced to a DTE interface.
Table C-3. COM Port Interface Connector
Signal Pin Number
Rx Data (out to DTE) 2
Ground 3
Tx Data (in from DTE) 4
DTR (in from DTE) 5
CD (out to DTE) 6
RTS (in from DTE) 7
Figure C-3. COM Port-to-PC Cable (Feature Number 7900-F1-510)
98-15886