PYLE Audio PLD58MUT - Manual (Page 7)

6
INSTALLATION
FIG.3
PROTECTIVE CASE
FRONT PANEL
FIG.1
How To Remove And Install The Front Panel
When detaching or attaching the control panel, be careful not to damage the
connectors on the back of the control panel and on the panel holder.
Detaching The Control Panel
Install The Front Panel
Before detaching the control panel, be sure to turn off the power.
1.Press the release button and the left hand side of the front panel will release.
(FIG. 1)
2.Pull-off the front panel (FIG. 2) and keep the front panel into the case (FIG. 3)
First insert the right hand side of the front panel into the housing of the unit , then
push the left hand side of the front panel and make sure the panel is properly
installed(FIG.4),and then press the PWR button (2) briefly to switch the device ON.
FRONT PANEL
RELEASE BUTTON
FIG.2
FRONT PANEL
Installing The Front Panel
FIG.4