PYLE Audio PLDVD-150 - Manual (Page 15)

15
BASIC OPERATION
Extra Function Control
The volume, colour, contrast and
brightness can be adjusted in “STOP”
mode.
ANGLE
: Select the volume, colour,
contrast and brightness
: Decrease the level
: Increase the level
DISPLAY : Recover to the normal value
(except volume)
Notes:
1. For MP3 disc, the above modes
cannot be adjusted.
2. When the sum of the contrast value
and brightness value is 29, it is
prohibited increasing.
3. Do not adjust the contrast and
brightness level too high.
AV switch
It is used to switch between the DVD
player and external AUDIO/VIDEO.
Please connect the external AV line to
the AV input terminal of the DVD player.
Then press AV button to switch to the
external AV. Pressing AV again will return
to the AV of the DVD unit.
Notes:
1. When switched to external AV, insert
the disc into the player. After the disc
identification it enters to play, and it
will automatically switch to AV output
of the DVD unit.
2. When you switch to external AV during
play, it will stop playing.
When switched to the AV of the DVD
player, it will play automatically.