Panasonic SC-EN27 - Manual (Page 7)

7
Safety precautions
Inside of product
Tuotteen sisällä
Produktets innside
Information on Disposal for Users of Waste Electrical & Electronic
Equipment (private households)
This symbol on the products and/or accompanying documents means that
used electrical and electronic products should not be mixed with general
household waste.
For proper treatment, recovery and recycling, please take these products
to designated collection points, where they will be accepted on a free
of charge basis. Alternatively, in some countries you may be able to return your
products to your local retailer upon the purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and prevent
any potential negative effects on human health and the environment which could
otherwise arise from inappropriate waste handling. Please contact your local
authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with
national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer
or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and
ask for the correct method of disposal.
-If you see this symbol-
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These conditions can
damage the cabinet and other components, thereby shortening the unit’s service
life.
Do not place heavy items on the unit.
Placement
Do not use high voltage power sources. This can overload the unit and cause
a fi re.
Do not use a DC power source. Check the source carefully when setting the
unit up on a ship or other place where DC is used.
Voltage
Ensure the AC mains lead is connected correctly and not damaged. Poor
connection and lead damage can cause fi re or electric shock. Do not pull, bend,
or place heavy items on the lead.
Grasp the plug fi rmly when unplugging the lead. Pulling the AC mains lead can
cause electric shock.
Do not handle the plug with wet hands. This can cause electric shock.
AC mains lead protection
Do not let metal objects fall inside the unit. This can cause electric shock or
malfunction.
Do not let liquids get into the unit. This can cause electric shock or malfunction.
If this occurs, immediately disconnect the unit from the power supply and contact
your dealer.
Do not spray insecticides onto or into the unit. They contain fl ammable gases
which can ignite if sprayed into the unit.
Foreign matter
Do not attempt to repair this unit by yourself. If sound is interrupted, indicators
fail to light, smoke appears, or any other problem that is not covered in these
instructions occurs, disconnect the AC mains lead and contact your dealer or an
authorized service center. Electric shock or damage to the unit can occur if the
unit is repaired, disassembled or reconstructed by unqualifi ed persons.
Extend operating life by disconnecting the unit from the power source if it is
not to be used for a long time.
Service
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
(Back of product)
Sales and Support Information
Customer Care Centre
• For customers within the UK: 08705 357357
• For customers within the Republic of Ireland: 01 289 8333
• Visit our website for product information
• E-mail: [email protected]
Direct Sales at Panasonic UK
• Order accessory and consumable items for your product with ease
and confi dence by phoning our Customer Care Centre Monday -
Thursday 9:00am - 5:30pm, Friday 9:30am - 5:30pm (Excluding
public holidays).
• Or go on line through our Internet Accessory ordering application at
www.panasonic.co.uk.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are provided
directly by Panasonic UK Ltd.
• It couldn’t be simpler!
• Also available through our Internet is direct shopping for a wide range
of fi nished products, take a browse on our website for further details.
For the United Kingdom and Republic of Ireland
Caution for AC Mains Lead
(For United Kingdom)
(“EB” area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your safety and
convenience.
A 5-ampere fuse is fi tted in this plug.
Should the fuse need to be replaced please ensure that the replacement
fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is refi tted
when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is
obtained.
A replacement fuse cover can be purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET
IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG
IS INSERTED INTO ANY 13-AMPERE SOCKET.
If a new plug is to be fi tted please observe the wiring code as stated below.If in any
doubt please consult a qualifi ed electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal which is marked
with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the terminal which is marked
with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH
IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL OR COLOURED
GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF–KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug (fi gures A and B).
Confi rm the AC mains plug fi tted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
Fuse cover
Figure A Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
Figure A Figure B
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
CLASS 1
LASER PRODUCT
Except continental
Europe and
the United Kingdom