Planar PX2210MW - Manual (Page 15)

1 3
OPERATING INSTRUCTIONS (cont.)
• 1<->2/RESET:
1. When OSD menu is in active status, this button will act as EXIT-KEY
(EXIT OSD menu) or go back to the previous menu.
2. When OSD menu is in off status, press this button for 2 seconds to
activate the Auto Adjustment function ,press this button 7 seconds to
The Auto Adjustment function is used to set the HPos, VPos, Clock
and Focus.
ON/OFF DDC-CI function.
• Power Indicator:
Blue — Power On mode.
Amber — Standby mode.
• OSD-Lock Function: To lock the OSD, press and hold the SELECT-
button while the monitor is off and then press power button to turn the
monitor on. To un-lock the OSD - press and hold the SELECT- button
while the monitor is off and then press power button to turn the monitor
on.