Philips CD440 - Manual (Page 13)

Using your phone 11
4 Using your phone
4.1 Make a call
4.1.1 Predialling
Enter the phone number (maximum
24 digits)
Press
to dial the number
• The call is initiated.
4.1.2 Direct dialing
Press to take the line
Enter the phone number
• The call is initiated.
4.1.3 Call from the call log
This feature is available if you have subscribed
the Caller Line Identification service (CLI) with
your network provider.
In idle mode :
Press to select CALL LIST
Press
Press
/ to scroll to your desired
unanswered call
Note
The screen can either display :
• the caller's number*
• the caller's name (if matched with the
phonebook)*
• UNAVAILABLE if it is an unidentified call**
• Availability of time and date information
depends on the service providers.
* Subject to a subscription of CLI with your
operator
** Unlisted numbers, withheld caller
identification.
Press to dial the number
• The call is initiated.
Note
The latest unanswered call will display first and
the oldest entry will be deleted when the
memory is full.
4
3
2
1
2
1
2
1
When the handset is fully charged, is
displayed.
3.4 Configure your phone
Depending on your country, the WELCOME
screen may not appear. In that case, you do not
need to select the country code to configure
your phone.
Before using your phone, you need to configure
it according to the country of use. After
charging it for a few minutes, the WELCOME
screen appears. Follow these steps to configure
your phone :
Press to display the list of countries
• Available country will display on the screen.
Note
If is pressed, the handset will show the
WELCOME screen again.
Press / to scroll to your country
Press to confirm your selection
• Your phone is configured according to your
selected country and back to idle screen.
Note
Once the country is selected, the default line
settings for the selected country will be applied
to your phone automatically.
Tip
If you chose the country in use wrongly or
would like to change the country after the first
configuration, you can press
in idle mode to
enter into the main menu, then input ##**793
to reset to default settings. After around 30
seconds, your phone will go back to
WELCOME screen for you to select the
country again.
3.5 How to power off or on the
handset power
You can power off your handset in order to
save battery power.
Press and hold for about five seconds to
power off the handset
Press
to power on the handset again 2
1
3
2
1
3