Planet Technology MH-2001 - Manual (Page 53)

MH-2001 Multi-Homing Security Gateway User’s Manual
Adding an WAN Group
Step 2. In the WAN Group window, click the New Entry button and the Add New Address Group
window will appear.
Step 3. In
the Add New Address Group window the following fields will appear:
„ Name: Enter the name of the new group.
„ Available Address: List the names of all the members of the WAN network.
„ Selected Address: List the names to assign to the new group.
„ Add members: Select the names to be added in the Available Address list, and click the
Add>> button to add them to the Selected Address list.
„ Remove members: Select the names to be removed in the Selected Address list, and click
the <<Remove button to remove them from the Selected Address list.
Step 4. Click
OK to add the new group or click Cancel to discard changes.
6.1.5 DMZ
Entering the DMZ window:
Click DMZ under the Address menu to enter the DMZ window. The current setting information such as the
name of the DMZ network, IP, and Netmask addresses will show on the screen.
- 47 -