Pioneer DVH-P5650MP - Manual (Page 64)

Operating the DSP details menu
1 2
1 DSP display
Shows the DSP status.
2 PLB indication
Shows when the Dolby Pro Logic B is turned
on.
% Press A and hold until FRONT appears
in the display, then press A to display the
DSP function names.
After FRONT is displayed, press A repeatedly,
the following DSP functions appear in the dis-
play:
FRONT (speaker setting)HPF (cross-over fre-
quency)FRT-L (speaker output level)
T TONE (test tone)INITIAL (time align-
ment mode)FL (time alignment adjustment)
AT EQ (auto-equalizer on/off)PEQ (3-band
parametric equalizer)
# When neither F/L nor F/R is selected in POSI,
you cannot switch to INITIAL or FL.
# To return to the display of each source, press
BAND.
Using the sound field control
The SFC function creates the sensation of a
live performance.
! The acoustics of different performance en-
vironments are not the same and depend
on the extent and contour of space through
which sound waves move and on how
sounds bounce off the stage, walls, floors
and ceilings. At a live performance you
hear music in three stages: direct sound,
early reflections, and late reflections, or re-
verberations. Those factors are programed
into the SFC circuitry to recreate the acous-
tics of various performance settings.
% Press EQ-EX to select the desired SFC
mode.
Press EQ-EX repeatedly to switch between the
following mode:
MUSICAL (musical)DRAMA (drama)
ACTION (action)JAZZ (jazz)HALL (hall)
CLUB (club)OFF (off)
Note
If the source is a 2-channel LPCM audio or a 2-
channel Dolby Digital audio and you select SFC
effects that are most applicable for 5.1-channel
audio (i.e., MUSICAL, DRAMA or ACTION), we
recommend turning Dolby Pro Logic B on. On the
other hand, when selecting SFC effects that are
intended for use with 2-channel audio (i.e., JAZZ,
HALL or CLUB), we recommend turning Dolby
Pro Logic B off.
Using the position selector
One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati-
cally adjust the speaker output levels and in-
serts a delay time to match the number and
position of occupied seats. When used in con-
junction with the SFC, the feature will make
the sound image more natural and offer a pa-
noramic sound that envelops you.
1 Press A to select POSI.
Press A until POSI appears in the display.
Digital Signal Processor
En
64
Section
12