Philips 78 - Manual (Page 10)

English
8239 300 32892
10
Connections
Step 4: Connecting FM / MW
antennas
Step 5: Connecting the
power cord
1
2
➠
FM
antenna
MW
antenna
fix the claw into
the slot
~ AC MAINS
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
SUBWOOFER FRONT
CENTER
2
1
Power Outlet
1
Connect the supplied MW loop antenna
to the MW jack. Place the MW loop
antenna on a shelf or attach it to a stand
or wall.
2
Connect the supplied FM antenna to the
FM (75
Ω
) jack. Extend the FM antenna
and fix its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible
from your TV, VCR or other radiation source
to prevent unwanted interference.
After everything is connected
properly,
1
Set the VOLTAGE SELECTOR to the
local power line voltage.
2
Plug in the AC power cord to the power
outlet.
Never make or change any connections
with the power switched on.
Helpful Hint:
– Refer to the type plate on the rear or
bottom of the system for identification and
supply ratings.
001-035-MX2500D-78-Eng2 7/20/04, 3:11 PM 10