Philips COLORTV 30PW6341/37 - Manual (Page 8)

AV (A UDIO /V IDEO ) I NPUT C ONNECTION 4
L/Mono
Monitor out
VIDEO
S-VIDEO
AV1 in
Y
Pb
Pr
AV2 in
AUDIO
R
COMPONENT VIDEO INPUT
AUDIO OUT
R L S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
1
AUDIO OUT
R L S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
3 4
5
7
1
2
2 4
3
5
7
Audio and video cables are not sup-
plied with the TV, but are available
from Philips or electronics retailers.
H ELPFUL H INT
Audio In
(Red and
White)
VCR Two (or
accessory device) (Equipped with
Video and Audio Output Jacks)
Video In
(Yellow)
Back of VCR
Back of TV
AV 1
Connection
AV2 Connection
VCR One (or
accessory device) (Equipped with
Audio and Video Output Jacks)
T he TV’s audio/video input jacks
are for direct picture and sound
connections between the TV and a
VCR (or similar device) that has
audio/video output jacks. Both the
AV
1 and AV2 Input Jack connec-
tions are shown on this page, but
either one can be connected alone.
Follow the easy steps below to con-
nect your accessory device to the
AV
1 and AV2 IN Jacks located on
the back of the TV.
1 Connect the VIDEO (yellow)
cable to the VIDEO AV
1 IN (or
AV2 IN) jack on the back of the
TV.
2 Connect the AUDIO (red and
white) cables to the AUDIO
(left and right) AV
1 IN (or AV2
in) jacks on the rear of the TV.
3 Connect the VIDEO (yellow)
cable to the VIDEO OUT jack
on the back of the VCR (either
one or two) or accessory device
being used.
4 Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) OUT jacks on the rear
of the VCR (either one or two) or
accessory device being used.
5 Turn the VCR (either one or
two) or accessory device and
the TV ON.
6 Press the CH+ or CH- buttons
set the TV to its AV1or AV2 chan-
nel.
7 With either of the VCRs (or
accessory devices) ON and a
prerecorded tape (CD, DVD,
etc.) inserted, press the PLAY
button to view the tape on the
television.